Error message

  • Notice: Undefined variable: ub in custom_detect_getbrowser() (line 174 of /home/ballymore/www.ballymore.com/sites/all/modules/custom_detect/custom_detect.module).
  • Notice: Undefined variable: ub in custom_detect_getbrowser() (line 185 of /home/ballymore/www.ballymore.com/sites/all/modules/custom_detect/custom_detect.module).
  • Notice: Undefined variable: ub in custom_detect_getbrowser() (line 201 of /home/ballymore/www.ballymore.com/sites/all/modules/custom_detect/custom_detect.module).
  • Notice: Undefined variable: ub in custom_detect_getbrowser() (line 174 of /home/ballymore/www.ballymore.com/sites/all/modules/custom_detect/custom_detect.module).
  • Notice: Undefined variable: ub in custom_detect_getbrowser() (line 185 of /home/ballymore/www.ballymore.com/sites/all/modules/custom_detect/custom_detect.module).
  • Notice: Undefined variable: ub in custom_detect_getbrowser() (line 201 of /home/ballymore/www.ballymore.com/sites/all/modules/custom_detect/custom_detect.module).

Scissor Lifts

Photo of worker on raised Scissor Lift with a 3 by 3 cantilever

WORKING
HEIGHT
PLATFORM
MAX
PLATFORM
MIN
STABILIZERS
MODEL #
WEIGHT
Lbs.
13’ 7’ 4” 2’ 4” NOT REQ’D HW1-7 1700
16’ 10’ 1” 5’ NOT REQ’D HW1-10 1800
19’ 12’ 10” 3’ NOT REQ’D HW2-13 2000
 
21’ 15’ 8” 5’ 8” STD. EQUIP. HW2-16* 2100
24’ 18’ 8” 3’ 7” STD. EQUIP. HW3-19* 2300
27’ 21’ 4” 6’ 4” STD. EQUIP. HW3-22** 2400
30’ 24’ 4” 4’ 1” STD. EQUIP. HW4-24** 2700
33’ 27’ 6’ 8” STD. EQUIP. HW4-27** 2800
Note: All base dimensions are 9' by 4' * Add 20" to 4ft. base for extended stabilizers
** Add 40" to 4ft. base for extended stabilizers

 

Features:

  • Manually propelled – Rated Capacity 1000 lbs./four person
  • Totally enclosed platform with 42” guardrails, midrails, 4” toeboards and swing-in gate
  • Large 3’x 8’ platform with serrated grating deck to assure secure footing
  • Built-in ladder provides access to platform in fully lowered position
  • 8” swivel casters for easy rolling and maneuverability
  • Self-storing outriggers extend from base to provide maximum stability (optional on lower height models)
  • Leveling jacks secure unit to floor and compensate for uneven surfaces (standard on floor models with raised deck heights above 15’, optional on lower height models)
  • Deep gray enamel finish
  • Meets/exceeds ANSI requirements
  • Platform controls: for operator safety both hands are required to change elevation
  • Emergency stops:
    • Located on platform for operator use
    • Emergency stop also located on base for use by ground personnel
    • Lockable to prevent unauthorized use

Standard features: 120 volt AC power (raise and lower) with thermal overload protection

Optional power:

  • 12 volt DC deep cycle system available with battery and charger
  • Air-Hydraulic Drive - recommended for hazardous environments

Optional accessories:

  • Cantilevered platform extension
  • Special voltage electrical systems
  • 120 volt outlet on platform
  • Powder coat safety orange paint

Custom designs available to meet your special access problems - contact factory for quotation

Need a Custom Solution?

We build custom ladders, lifts and platforms of all types, shapes and sizes.

Get a Quote

 

Can we help you?

Would you like someone to call you?