MRO Telescoping Hydraulic Maintenance Lifts

MRO Telescoping Hydraulic Maintenance Lifts
Rugged 2 person 500 lbs. capacity!

Two men on lift looking at light near roof edge - smaller picture of man rolling ladder into standard door opening Overhead Maintenance, Repair and Operating problems are solved with Ballymore’s two-worker MRO telescoping hydraulic lift. Helps maintenance workers get jobs done quickly and safely with easy mobility and high speed elevation. Four manually propelled models with working heights to 34’.

Rated capacity 500 lbs. / two person
Select from maximum platform heights of 15’, 19’, 24’ or 28’
Roomy 28” x 36” platform accommodates two workers
Totally enclosed platform with 42” guard rails, midrails and gate; 4” toeboards and non-slip deck
Built-in ladder with flat, skid resistant treads and grab rails provides access to platform in fully lowered position
Rails fold for doorway passage and easy storage
Non-marking 8” casters for easy rolling and maneuverability
Self-storing outriggers extend from base to provide maximum stability
Leveling jacks secure unit to floor and compensate for uneven surfaces
Standard deep gray enamel finish
Meets/exceeds ANSI safety standards

Hydraulic system includes:
- Large diameter cylinder with chrome-plated ram and fluid restrictor
- Low pressure system includes by-pass pressure valve to prevent overload
- Check valve maintains platform elevation
- Solenoid valve provides remote lowering
- Base mounted lowering valve for safe descent in power failure

*Note: If you have a slower internet connection please allow the video to download first to ensure uninterrupted viewing.

Model Number

Platform Max

Height Min

Working Height

Weight Lbs.

MR-15-AC

15'

6' 4"

21'

800

MR-15-DC

15'

6' 4"

21'

930

MR-20-AC

19' 3"

6' 4"

25'

1000

MR-20-DC

19' 3"

6' 4"

25'

1130

MR-24-AC

23' 8"

6' 7"

30'

1200

MR-24-DC

23' 8"

6' 7"

30'

1330

MR-28-AC

28'

6' 10"

34'

1420

MR-28-DC

28'

6' 10"

34'

1550

OPTIONAL ACCESSORIES

Air-Hydraulic power

Tool Tray

Safety Orange Finish

Fluorescent tube holder

Platform duplex receptacle

500 pounds capacity

Three available power options:
- Convenient plug in 120V/60/1AC
- Independent 12V DC deep cycle system complete with battery and charger
- Air hydraulic power requiring 140 CFM with 90 PSI pressure

Electrical Note: (on all lift products)
Our standard electrical components are NEMA 1 or equivalent and are intended for indoor use in normal atmospheric conditions.

Caution: Unless special provisions are made, platforms and lifts must not be used for energized barewire electrical work or operated on inclined surfaces. When this equipment is used, ground personnel should be excluded from the immediate work area. Compliance with unspecified codes should not be assumed.

Call Us Today... 800-762-8327
Ballymore Rolling & Safety Ladders
3135 Lower Valley Road - Parkesburg, PA 19365
Tel: 610-593-5062 . Fax: 610-593-8615